Material 1.4057

Stainless steel

The grade 1.4057 is a martensitic stainless steel.
1.4057 is mainly supplied in the quenched and tempered condition.
In the quenched and tempered condition, the tensile strength at room temperature is between 800 and 950 N/mm², the yield strength is at least 600 N/mm².
The nickel content gives the material X17CrNi16-2 its toughness.
We stock 1.4057 in round and flat dimensions. If you need tubes or forgings, this is also no problem.
For your important projects you will get European top quality products from us.

Do you have any questions about the material or would you like to order? Complete our inquiry form, it`s free of charge and without obligation. We will get in touch with you in order to provide you with more information.

1.4057

Standards

HDIN / EN US-Standard AFNOR UNI JIS request
X17CrNi16-2 X20CrNi17-2 AISI 431 X16CrNi16 SUS431 SUS431FB request

Material Category: Stainless steel

Applications

Mechanical engineering
Pumps
Piston rods
Turbine blades
Fittings

Heat Treatment

Soft annealing 680 - 800 C° oven,air
Hardening 950 - 1050 C° Polymer, oil or air
Tempering QT800 750 - 800 C° + 650 - 700 C° (2nd tempering) water or air
Tempering QT900 600 - 650 C° Water or air

Weldability

1.4057 is difficult to weld

Chemical Composition

C % Si % Mn % P % S %  Cr % Ni %
0,12 - 0,22 max 1,00 max 1,50 max 0,040 max 0,015 1) 2) 15,00 - 17,00 1,50 - 2,50

 

Product Specifications

DIN EN 10088-3
DIN EN 10272
DIN EN 10250-4
DIN EN 10222-2

Mechanical Properties

geglüht Zugfestigkeit (Rm) Härte [HB 30] Probenlage
  <= 950 N/mm² <= 295 HB 30 längs
gehärtet Zugfestigkeit (Rm) Härte [HB 30] Härte [HRC]
  ~ 1.570 MPa ~ 450 HB 30 ~ 47 HRC
vergütet 0,2% Dehngrenze (Rp0,2) Zugfestigkeit (Rm) Bruchdehnung (A5, 65) Einschnürung (Z) Kerbschlagarbeit KV (ISO-V/Charpy-V) Probenlage
<= 60 mm     >= 14 %   >= 25 Joule längs
60 - 160 mm     >= 12 %   >= 25 Joule längs
<= 160 mm >= 600 N/mm² 800 - 950 N/mm²   >= 45 %   längs
  >= 515 N/mm²       ~ 100 ° C  
  >= 565 N/mm²       ~ 100 ° C  
  >= 495 N/mm²       ~ 150 ° C  
  >= 525 N/mm²       ~ 150 ° C  
  >= 475 N/mm²       ~ 200 ° C  
  >= 505 N/mm²       ~ 200 ° C  
  >= 460 N/mm²       ~ 250 ° C  
  >= 490 N/mm²       ~ 250 ° C  
  >= 440 N/mm²       ~ 300 ° C  
  >= 470 N/mm²       ~ 300 ° C  
  >= 405 N/mm²       ~ 350 ° C  
  >= 430 N/mm²       ~ 350 ° C  
  >= 355 N/mm²       ~ 400 ° C  
  >= 375 N/mm²       ~ 400 ° C  
angealssen bei 600 - 800 ° C Zugfestigkeit (Rm)
  800 - 1050 N/mm ²

Back to the overview and search.

Material request

Screenreader label 
_I__________N6U______
TZ_____W____6_____K49
_E____56K___WPI______
_K_____U____B_E___ILE
E2L_________IMP______
* mandatory field
Screenreader label

Company

Five reasons that are in favor of BASEDO STEEL

Learn more

Services

A short overview of our services

Learn more

Questions?

Would you like to ask us about your specific demands?

Contact us